·The first batch of C-NCAP collision results in 2015

On April 23, 2015, China Automotive Technology and Research Center released the evaluation results of the first batch of 17 models of C-NCAP in 2015 in Tianjin. At the same time, the Management Center released the "C-NCAP Management Rules (2015 Edition)".
The 17 models participating in the collision involved 9 independent brands, 7 joint venture brands and 1 imported brand. Including 5 A-class cars, 3 B-class cars, and 9 SUV models.
Judging from the results of the collision results, except for the Jinbei Zhishang S30 manual elite version, the scores of other independent brands have not widened compared with the joint ventures and imported brands. Some of the independent brands have achieved the upstream level, and the Guanzhi 3 1.6T automatically promotes the increase. The model scored 60.5 points (out of 62) and became the highest scoring model in this collision experiment. In addition, the small SUV collision results are lower than the sedan. The main loss points were positive 40% collision experiments.
According to relevant sources, the models participating in the crash test performed well, and the configuration ratios of the safety assemblies that met the C-NCAP management rules plus points reached a high proportion. Seat belt pretensioners and force limiters, which are very effective for occupant protection, are also increasingly used in rear seats of vehicles.
At this conference, the Management Center explained the release of the C-NCAP Management Rules (2015 Edition). The new rules will be implemented after July 1 this year.
Compared with the 2012 version of the rules, the 2015 rules not only improved and tightened the test details and whipping test scores, but also revised the star rating criteria, especially the 5-star threshold increased from 52 points to 54 points, 4 stars. The threshold was increased from 44 points to 48 points. Since the driver's seat belt reminder and the child seat ISOFIX fixture have become the standard configuration of the regulations, the 2015 version of the rules no longer points to the two devices, the new rule total score from 62 points to 61 points, get high stars The difficulty of the grade evaluation has increased significantly. In addition, in order to more objectively reflect the representativeness of the evaluation model, the new version of the selection of the voluntary application evaluation model in the management program was changed from the original applicant's designated configuration to the model with the largest sales volume in the model market.

The cemented carbide seal-ring can be divided into both or the kinetic seal-ring and staticseal-ring, and constitutes mechanic seal together with the spring, rubber seal-ring and steel jacket.

The precision seal-ring is made of high quality materials by an advanced process, having very complicated shapes, high accuracy, stable mechanic properties, much higher wear and corrosion resistance, and a service life of more than twenty thousand hours in the normal case.

The Seal Ring will be used mainly for waste water pump,water discharge pump for mines, centrifugal pump, centrifuge, slag slurry pump and slurry abrasion and corrosion. The seal-ring will be installed on the pump body andratatingaxle, and forms through the end face of the kinetic and static ring a liquid or gas seal.

Seal Ring

Seal Ring,Hard Alloy Sealing Ring,Hard Metal Sealing Ring,Cemented Carbide Mechanical Seal Ring

Zhengtong Special Material Factory Hi&New Tech Zone Chengdu , http://www.ztferre.com