The third production line of the coke tunnel furnace is put into production

The third production line of the coke tunnel furnace is put into production

Recently, the Yuming Energy Science and Technology Research Institute of Kaifeng City , Henan Province independently researched and developed the “model coke tunnel furnace” project. After the third production line was inspected, the main design parameters met the design requirements, the operation was successful , and it was put into formal production!

At present, the technology of "model coke tunnel kiln" developed by the Yuming Energy Technology Research Institute of Kaifeng City , Henan Province, has obtained a patent certificate issued by the Intellectual Property Office. The "model coke tunnel kiln" adopts a conjoined structure, an oxygen-free sintering process and an oxygen-free cooling process. The application of this technology is the first time both at home and abroad. Through the new investigation of the project, it is shown that many of the technologies of our “model coke tunnel kiln” have filled the blank of the technology at home and abroad.

The "model coke tunnel furnace" has the following characteristics:                            

First, the furnace energy saving and environmental protection, single-ton products reduce energy consumption by nearly 30%

The R&D design was changed from a single hole to a double hole on the basis of 6- I and 6- II tunnel kiln furnaces, and the fire tunnel structure was also greatly changed. The results of the operation show that: “Type coke tunnel kiln” not only saves space and investment; more importantly, it is energy-saving and environmentally friendly, and the energy consumption per ton product is reduced by nearly 30% .                               

Second, can completely achieve oxygen-free dry quenching, the finished product rate can reach 99%

The special structure of the preheating section and the cooling section of the furnace is designed based on the ideal coking curve of coal products. The product's furnace temperature is lower than 100 °C, and the product's furnace temperature is lower than 290 °C. Can completely achieve oxygen-free dry quenching, the finished product rate can reach 99% .  

Third, the furnace has a two-way adjustment of oxidation, reducing atmosphere

"Type coke tunnel kiln" has the function of two-way adjustment of oxidation and reduction atmosphere, and can achieve double effects of external heating and internal heating. In the absence of external heating, just adjust the product formula, you can change to internal combustion production requirements .

Yuming Energy Technology Institute, Kaifeng City, Henan Province, provides a full set of coke and briquette technology, and has a pilot kiln and ancillary equipment for customer selection.

★★ Henan Kaifeng Yuming Energy Technology Research Institute solemnly promised - At present, the scientific and technological market is mixed, true and false difficult to argue, in order to dispel the customer's doubts, our company promises: reached a preliminary cooperation intention on the Yuming Institute technology Under the premise of the application, we can go to the site of product application manufacturers.

Kaifeng Yuming Energy Technology Institute, Henan Province

       Address: Room 605 , Building 1, No. 23 Hospital, Kaifeng College                   Contact person: Zhang Hongyu

       Phone: 13839955326  

       Fax: 0378-5951032  

      


    

Ceramic Ring injector

Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.Professional Electronic Components For Ceramic Ring manufacturer is located in China, including High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories, etc.

Electronic Components For Ceramic Ring ,High Reliability Ceramic Ring Injector ,Laser Cutting Machine Accessories,Metal Laser Cutter Accessories

Wuxi huaoulai automation equipment Co., Ltd , https://www.china-hol.com