Mini Machine Fine Stone Aggregate Concrete Pump

Mini Machine Fine Stone Aggregate Concrete Pump Product Introduction 1. The HW high-floor cement mortar pump is a compact and efficient fluid mixing and conveying equipment. It is widely used in the construction of high-rise buildings for wet-mixed mortar pumping and wall plastering, as well as in underground engineering projects such as ground heating, tunnels, and mines for support lining. 2. This machine can pump fine aggregate concrete with a particle size of less than 25mm at a low investment and operating cost. It is an ideal choice for construction projects. The S-tube is used as the distribution valve to ensure smooth pumping even for larger aggregates. 3. The hydraulic-driven mixing device enables secondary mixing, which enhances the pumping performance. The glass plate and cutting ring are made with hard alloy inlay, offering excellent wear resistance and long service life. 4. The hydraulic system features independent three-circuit electro-hydraulic control, ensuring high reliability. The electrical system includes pressure return control, effectively preventing pipe blockage issues. 5. With its elegant design and lightweight structure, it is easy to transport. When combined with batching mixing equipment, it allows for continuous pumping, significantly improving the construction schedule. Technical Parameters




**Contact:** Sunny Kong Mobile: +86 158 5378 5289 Tel: 0086-537-2881968 Company: Jining Hengwang Mining Machinery Co., Ltd.

Replacement Filter Elements

It is very important for element design and material.

Element Struction

FPM seal ring ensure the air-tightness between filter head and filter element, to achieve a positive filtration Effect.

Double stainless steel support layer to ensure the fulter element strength, deep bed Multi-wrap borosilicate glass microfibre large flow passage prevent high pressure drop.

With 96% porosity high dirt holding capacity, lifespan up to 6000 to 8000 hours. The general differential pressure is 0.17~0.25 kg/cm, less than 0.65kg/cm.

The element cover is made of PA+GF, free from deformation at 1.8Mpa pressure and high temperature of 240℃ and capable of resisting general acid and alkali chemical corrosion and withstanding the severe compressed air environment.

Special material for the outer layer of filter element, with strong hydrophobic and oilphobic, prevent the oil or water being blown away and received drying and filtering effect.

Industrial Water Filter Cartridge,Compressed Air Filter Element,Activated Carbon Filter Cartridge

Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com