Gold Ore Mining Plant Screw Classifier

Model NO.: FG15, FG10, FG2.4
Energy Saving: Energy Saving
Warranty: 1 Year
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Specification: ISO, CE
Origin: China
Model NO.: FG15, FG10, FG2.4
Energy Saving: Energy Saving
Warranty: 1 Year
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Specification: ISO, CE
Origin: China
Gold Ore Mining Plant Screw Classifier 

High Weir Spiral Classifier/screw classifier:

High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Gold Ore Mining Plant Screw Classifier

Features and advantages of concentrating spiral classifier/screw classifier

1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Gold Ore Mining Plant Screw Classifier
Main Technical Parameters of the screw classifier:


Model

Type

Spiral diameter(mm)

Flume length(mm)

Spiral speed(r/min)
Capacity(t/d) Motor power(kw) Weight(t)
Return sand Overflow Drive Upgrade
High
Weir
Spiral
Classifier
FG7.5 750 5500 6-10 340-570 65 3.0 By Hand 2.7
FG10 1000 6500 5.0-8.0 675-1080 110 5.5 By Hand 4.43
FG12 1200 6500 5.0-8.0 1170-1870 155 5.5 1.5 8.7
FG15 1500 8400 4.0-6.0 1830-2740 235 7.5 2.2 12.5
FG20 2000 8400 4.0-6.0 3240-5400 400 11 2.8 20.5
FG24 2400 9210 3.6 4650-7450 580 15 3.0 25.6
FG30 3000 1250 3.2 11625 890 22 4.0 37.7
2FG12 1200 6500 5.0-8.0 2340-3740 310 5.5×2 1.5×2 14.0
2FG15 1500 8400 4-6.0 3660-5480 470 7.5×2 1.5×2 21.1
2FG20 2000 8400 3.0-5.5 7780-11880 800 11×2 2.8×2 36.5
2FG24 2400 9210 3.6 13600 1160 15×2 3×2 46.8
2FG30 3000 12500 2.0-3.2 14600-23400 1785 22×2 4×2 73.0
Submerged
Spiral
Classifier
FC12 1200 8400 5-8 1170-1870 120 7.5 2.2 10.4
FC15 1500 10500 4.0-6.0 1830-2740 185 7.5 2.2 16.8
FC20 2000 12900 2.0-5.5 3895-5940 320 15 2.8 29.1
FC24 2400 14200 2.5-4.0 4650-7450 455 18.5 4 41.0
FC30 3000 14300 3.2 11625 705 30 4 56.8
2FC15 1500 10500 4.0-6.0 2280-5480 370 7.5×2 1.5×2 30.7
2FC20 2000 12900 3.0-5.5 6480-11800 640 11×2 3×2 50.0
2FC24 2400 14200 3.67 9300-14900 910 18.5×2 4×2 67.9
2FC30 3000 14300 3.2 23300 1400 30×2 4×2 85.3
Gold Ore Mining Plant Screw Classifier
Contact:
Ms Sara Pang
Mobile phone :  0086137 8347 1727
 
 
Gold Ore Mining Plant Screw Classifier 

High Weir Spiral Classifier/screw classifier:

High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Gold Ore Mining Plant Screw Classifier

Features and advantages of concentrating spiral classifier/screw classifier

1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Gold Ore Mining Plant Screw Classifier
Main Technical Parameters of the screw classifier:


Model

Type

Spiral diameter(mm)

Flume length(mm)

Spiral speed(r/min)
Capacity(t/d) Motor power(kw) Weight(t)
Return sand Overflow Drive Upgrade
High
Weir
Spiral
Classifier
FG7.5 750 5500 6-10 340-570 65 3.0 By Hand 2.7
FG10 1000 6500 5.0-8.0 675-1080 110 5.5 By Hand 4.43
FG12 1200 6500 5.0-8.0 1170-1870 155 5.5 1.5 8.7
FG15 1500 8400 4.0-6.0 1830-2740 235 7.5 2.2 12.5
FG20 2000 8400 4.0-6.0 3240-5400 400 11 2.8 20.5
FG24 2400 9210 3.6 4650-7450 580 15 3.0 25.6
FG30 3000 1250 3.2 11625 890 22 4.0 37.7
2FG12 1200 6500 5.0-8.0 2340-3740 310 5.5×2 1.5×2 14.0
2FG15 1500 8400 4-6.0 3660-5480 470 7.5×2 1.5×2 21.1
2FG20 2000 8400 3.0-5.5 7780-11880 800 11×2 2.8×2 36.5
2FG24 2400 9210 3.6 13600 1160 15×2 3×2 46.8
2FG30 3000 12500 2.0-3.2 14600-23400 1785 22×2 4×2 73.0
Submerged
Spiral
Classifier
FC12 1200 8400 5-8 1170-1870 120 7.5 2.2 10.4
FC15 1500 10500 4.0-6.0 1830-2740 185 7.5 2.2 16.8
FC20 2000 12900 2.0-5.5 3895-5940 320 15 2.8 29.1
FC24 2400 14200 2.5-4.0 4650-7450 455 18.5 4 41.0
FC30 3000 14300 3.2 11625 705 30 4 56.8
2FC15 1500 10500 4.0-6.0 2280-5480 370 7.5×2 1.5×2 30.7
2FC20 2000 12900 3.0-5.5 6480-11800 640 11×2 3×2 50.0
2FC24 2400 14200 3.67 9300-14900 910 18.5×2 4×2 67.9
2FC30 3000 14300 3.2 23300 1400 30×2 4×2 85.3
Gold Ore Mining Plant Screw Classifier
Contact:
Ms Sara Pang
Mobile phone :  0086137 8347 1727
 
 

Car Elevator

Car Elevator,Car Lift,Car Door Elevator

Delfar Elevator Co., Ltd. , http://www.zjescalators.com