Chinese CNC Lathe Machine Tools with Taiwan Spindle Lathes Price

High Speed Slant Bed CNC Lathe


I. Main Functions of Slant Bed CNC Lathe

  This product uses 30 degrees or 45 degrees of inclined type layout with one-piece hollow tubular bed, which greatly improves the flexural rigidity and torsional stiffness of machine when working. At the same time after two aging treatment, it has improved the stability, high rigidity and stability of the machine, which ensure high accuracy of the whole machine. The X and Z axis control the half close loop CNC lathe by direct-connected servo. All the two axis are linear guide way rail. The structure and dimension of axis are compact and reasonable. Spindle is gear transmission and variable- frequency variable-speed drived by variable frequency motor through belt which can clamping various plate, shaft, and component all at once. It can complete the processing of vehicles, groove, inner (outer) hole, spherical, R cone angle, curved shape, cone shape, face shape, male thread single head, thread single head and multiple thread processing. It is applicable for multi and mass production, and can meet the processing demands for complex and high precision parts.



II. Main Features for Slant Bed CNC Lathe



1. Construction casting molded with resin sand of bed,headstock,saddle plinth,ect 
2. Turcite-B coated on mating surfaces between saddle and guideways  
3. Precision ballscrew,high rigidity precision compound bearings ensure accurate positioning and efficient driving of cnc lathe.Centralized oil lubricator providing forced automatic lubrication onto ballscrew,mating surfaces  
4. High spindle speed with wide variable speed ranges.Low noise 80db,CKE-Zseries cnc lathe machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low,medium,high speed ranges without turning off the cnc lathe machine.CKE-i series cnc lathe machine with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing.  
5. Flexible control panel enables convenient tool setting for the cnc lathe.  
6. Popular full enclosed guards with interlock offer a waterproof and chip-free environment.  
7. Vertical 4-p toolpost,horizontal 6-p toolpost,quick change toolpost,etc are available for your selection for this cnc lathe machine. 
8. Optional,pneumatic,hydraulic chuck and tailstock are available for this cnc lathe machine.  
9. FANUC,SIEMENS,FAGOR,GSK,etc control systems can be appointed E-handwheel function can also be equipped.


III. Main Technical Specifications of Slant Bed CNC Lathe
  


IV. Company Information
 
  Shandong Hunk Precision Machinery Co., Ltd.is a CNC machine tools company, located in the beautiful capitcal Jinan city, integrated with manufacturing, processing and sales. It was set up by the former Jinan Machine tools factory employees. It has a subsidiary corporation Jinan HANKUI International Trade Co., Ltd. The plant area is about 10,000 square meters. We have a number of R&D persons and technicians who have more than 20 years experience of machine tool design and assembly. We have mastered the advanced machine tool technology and were dedicating to service customers domestic and abroad and welcomed deeply.
  The main products are horizontal / vertical/ gantry machining center, flat / slant bed CNC tuning lathe, CNC vertical turning lathe etc. With superior equipment, advanced technology, detection devices, the imported parts from Taiwan, Japan, Germany etc., we can manufacture the high quality machine tools. And we also take over the metal products and spare parts machining in good quality.
 


V. F&Q
 
1. Q: Do you have after sales support?
 A: Yes, we are happy to give advice and we also have skilled technicians available, We need your machines running in order to keep your business running.
 2. Q: Once we've bought a machine from you, are you able to supply us with material?
 A: We can assist you in finding the appropriate materials to suit your machine
 3. Q: Do you sell only standard machines?
 A: No, most of our machines are built according to customers specifications, using top brand name components.OEM is acceptable
 4. Q: Do you have a warranty on your machines?
 A: One year warranty excluding electrical components.
 5. Q: What sales terms do you have?
 A: T/T, L/C,West Union.
 6. Q: Do you have instruction manuals?
 A:We provide you with instruction manuals, electricity layouts, civil requirements, and machine drawings or Video Support,
 7. Q: Once a machine arrives at our factory what happens then?
 A: We will send you a technician or engineer that will commission and install your machine, with training for your staff if required at a separate fee. 
 8. Q: What do I need to offload my machine from the container?
 A: You are not responsible for the offloading of your machinery, and it is recommended that you use a reputable rigging company.
 9. Q: What kind of controls/Parts do you use on your machines?
 A:AMS,OMRON, Schneider, Siemens, and ASK,ABBA,OPTIMA(ITALIA),HSD
 10. Q: What is your delivery time?
 A: Depending on the type of machine, duration of 10 days to 45 days from date of order. 
 11. Q: Do we receive any updates while machine is in the manufacturing process?
 A: Yes.Regular updates on progress will be sent to you.
 
VI. Contact Information
 
  High Speed Slant Bed CNC Lathe


I. Main Functions of Slant Bed CNC Lathe

  This product uses 30 degrees or 45 degrees of inclined type layout with one-piece hollow tubular bed, which greatly improves the flexural rigidity and torsional stiffness of machine when working. At the same time after two aging treatment, it has improved the stability, high rigidity and stability of the machine, which ensure high accuracy of the whole machine. The X and Z axis control the half close loop CNC lathe by direct-connected servo. All the two axis are linear guide way rail. The structure and dimension of axis are compact and reasonable. Spindle is gear transmission and variable- frequency variable-speed drived by variable frequency motor through belt which can clamping various plate, shaft, and component all at once. It can complete the processing of vehicles, groove, inner (outer) hole, spherical, R cone angle, curved shape, cone shape, face shape, male thread single head, thread single head and multiple thread processing. It is applicable for multi and mass production, and can meet the processing demands for complex and high precision parts.



II. Main Features for Slant Bed CNC Lathe



1. Construction casting molded with resin sand of bed,headstock,saddle plinth,ect 
2. Turcite-B coated on mating surfaces between saddle and guideways  
3. Precision ballscrew,high rigidity precision compound bearings ensure accurate positioning and efficient driving of cnc lathe.Centralized oil lubricator providing forced automatic lubrication onto ballscrew,mating surfaces  
4. High spindle speed with wide variable speed ranges.Low noise 80db,CKE-Zseries cnc lathe machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low,medium,high speed ranges without turning off the cnc lathe machine.CKE-i series cnc lathe machine with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing.  
5. Flexible control panel enables convenient tool setting for the cnc lathe.  
6. Popular full enclosed guards with interlock offer a waterproof and chip-free environment.  
7. Vertical 4-p toolpost,horizontal 6-p toolpost,quick change toolpost,etc are available for your selection for this cnc lathe machine. 
8. Optional,pneumatic,hydraulic chuck and tailstock are available for this cnc lathe machine.  
9. FANUC,SIEMENS,FAGOR,GSK,etc control systems can be appointed E-handwheel function can also be equipped.


III. Main Technical Specifications of Slant Bed CNC Lathe
  


IV. Company Information
 
  Shandong Hunk Precision Machinery Co., Ltd.is a CNC machine tools company, located in the beautiful capitcal Jinan city, integrated with manufacturing, processing and sales. It was set up by the former Jinan Machine tools factory employees. It has a subsidiary corporation Jinan HANKUI International Trade Co., Ltd. The plant area is about 10,000 square meters. We have a number of R&D persons and technicians who have more than 20 years experience of machine tool design and assembly. We have mastered the advanced machine tool technology and were dedicating to service customers domestic and abroad and welcomed deeply.
  The main products are horizontal / vertical/ gantry machining center, flat / slant bed CNC tuning lathe, CNC vertical turning lathe etc. With superior equipment, advanced technology, detection devices, the imported parts from Taiwan, Japan, Germany etc., we can manufacture the high quality machine tools. And we also take over the metal products and spare parts machining in good quality.
 


V. F&Q
 
1. Q: Do you have after sales support?
 A: Yes, we are happy to give advice and we also have skilled technicians available, We need your machines running in order to keep your business running.
 2. Q: Once we've bought a machine from you, are you able to supply us with material?
 A: We can assist you in finding the appropriate materials to suit your machine
 3. Q: Do you sell only standard machines?
 A: No, most of our machines are built according to customers specifications, using top brand name components.OEM is acceptable
 4. Q: Do you have a warranty on your machines?
 A: One year warranty excluding electrical components.
 5. Q: What sales terms do you have?
 A: T/T, L/C,West Union.
 6. Q: Do you have instruction manuals?
 A:We provide you with instruction manuals, electricity layouts, civil requirements, and machine drawings or Video Support,
 7. Q: Once a machine arrives at our factory what happens then?
 A: We will send you a technician or engineer that will commission and install your machine, with training for your staff if required at a separate fee. 
 8. Q: What do I need to offload my machine from the container?
 A: You are not responsible for the offloading of your machinery, and it is recommended that you use a reputable rigging company.
 9. Q: What kind of controls/Parts do you use on your machines?
 A:AMS,OMRON, Schneider, Siemens, and ASK,ABBA,OPTIMA(ITALIA),HSD
 10. Q: What is your delivery time?
 A: Depending on the type of machine, duration of 10 days to 45 days from date of order. 
 11. Q: Do we receive any updates while machine is in the manufacturing process?
 A: Yes.Regular updates on progress will be sent to you.
 
VI. Contact Information
 
 

Marble Basin

Counter Top Marble Basin,Wall Hung Marble Basin,Freestanding Marble Basin

Geagle Intelligent Sanitary Wares Co., Ltd. , http://www.zhanying-china.com