Rod pump must be in the direction of the established operation to produce a certain suction row.
Pump work, should pay attention to check the pressure, temperature and mechanical seal work. Shaft seal should allow a trace of leakage, such as leakage does not exceed 20-30 seconds / drop, then that normal. If the screw pump noise during work, which is often due to the oil temperature is too low, the viscosity of the oil is too high, the oil into the air, the coupling lost in the pump or excessive wear and other causes.
More Keyword Search: Screw Pump
The rare-earth metal thick film heating technology is one of today's most innovation and forward-looking solution for electric heating field.The thick film heating tubes/elements are produced by screen-printing dielectrics (5 layers), resistance (palladium-silver), conductor (silver) and isolation glazes on the substrate and sintered 7-9 times at temperature over 900℃.
With 2200W Thick Film Heating Tube simple tubular structure, it can heat water flow inside the tube. Electric Circuit printed on tube surface, to heat the water flow inside. For applications where space is limited, this simple profile heater offers high thermal power density and fast response times to heat up or cool down (due to low thermal mass)
JIEDA company can supply products according to customers' drawings and offer our clients reasonable prices. Our company also can develop heating solutions and products together with customers.
2.2KW Thick Film Heating Tubes
2200W Thick Film Heating Tubes,Tubular Heater ,Electrical Water Heater,Propane Tube Heater
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de