Dongfeng Chaochai's vehicle calibration team is not afraid of cold and then goes to Heihe

Recently, Dongfeng Chaochao Company's entire vehicle calibration team has 12 members. Starting from the test room, they drove five vehicles to Heihe to conduct vehicle calibration.

Dongfeng Chaoxiang Diesel Vehicle Calibration Team Goes to Heihe
Dongfeng Chaoxiang Diesel Vehicle Calibration Team Goes to Heihe

The minimum temperature of Heihe in Heilongjiang Province is far below -30°C. In such a severe cold, Dongfeng Chaochai’s entire vehicle calibration team successfully completed the 4A, the National III, and the National IV projects, and set off. Because they know that only the completion of this calibration, in 2011 will have the opportunity to mass production and marketing.

The vehicles that are being calibrated include Hebei Zhongxing pickup truck equipped with 485 model III, Yutong buses equipped with NGD 3.0 country III model, Beiqi limited bell equipped with model III, and IV valve equipped with country IV. Four-valve models of Dongfeng Dolika. The vehicle calibration includes cold start, driving performance in the division, hydraulic system inspection, DOB, smoke test, idle test, electrical calibration and other items.

According to Zhao Shuzhi, director of vehicle calibration led by the team, the biggest difficulty in the calibration of the cold is the outdoor work and the snow and ice roads in cold weather. The temperature inside the vehicle is low, and the temperature of the calibration conditions must be controlled at minus 30 degrees, the coldest temperature is selected every day, and the outdoor working hours are 8 hours in the morning or in the morning. They must complete all calibration projects as soon as possible and they will not be able to return for the Spring Festival and the market will not wait for them.

Boiler Bend

Seamless Boiler Bend,Stainless Steel Boiler Bend,Boiler Tube Bending,U Bent Tube Boiler

Jinan Yuanda Power Equipment Co.,Ltd. , https://www.jnyuandaboiler.com