Model NO.: KM-91Z
Name: Hose Crimping Machine
Type: Buttontype Hose Crimping Machine
Weight: 160kg
Accessory: Hydraulic Hose Dies 10 Sets
Color: Blue
Crimp Range: 4mm-46mm
H.S.: 846291900
Application: Crimp Hydraulic Hose, Fitting & Ferrule
Package Size: 108cm*90cm*105cm
Trademark: KANGMAI
Transport Package: Wooden Case
Specification: CE
Origin: China Handan
HS Code: 846291900
Â
Hose crimping machine KM-91Z technical data:
(Computer type hydraulic crimping machine)
Hose crimping machine KM-91Z dies
Note: Die bore&Length can be customized as your hydraulic fitting & ferrule size.
(Computer type hydraulic crimping machine)
| Crimp range | 4mm-55mm |
| For hydraulic hose | 1 1/4inch 4SP |
| Max opening without dies | 90mm |
| Opening | 20mm |
| Force | 400T |
| Cycle time | 12s |
| Voltage & Power | 380V-50HZ-3PH |
| Optional voltage | 220V,440V |
| Pump | Piston pump |
| Dies sets | 8 |
| System pressure | 30Mpa |
| Machine size | 640mm*480mm*660mm |
| Weight without oil | 160KG |
| Shelf+quick change | NO |
| Electric limit switch | has |
| Electric control with touch screen | No |
Hose crimping machine KM-91Z dies
| Die bore | 15mm | 18mm | 20mm | 23mm | 26mm | 29mm | 37mm | 46mm |
| Length | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 78mm |
| Hose I D | 6mm | 8mm | 10mm | 13mm | 16mm | 19mm | 25mm | 32mm |
Note: Die bore&Length can be customized as your hydraulic fitting & ferrule size.
Hose crimping machine KM-91Z Special:
NEW foam inserts introduced to protect your machine from debris dropping into the bottom of the head. With there you will minimize the risk of debris getting into the cylinder which could cause damage to seals and other moving parts of the head. This will significantly extend the life of hydraulic hose crimping machine.
What clients say about KANGMAI hose crimping machine: 
Hose crimping machine KM-91Z application:
1. Suitable for high precision pressing of low and high pressure hose diameter, starting from 1/4" to 1 1/4" internal hose pipe.
2.Used rubber hose to transmit hydraulic pressure as the working power.
3. Used in Building Construction, Petroleum Industry, Chemical Industry, Car and Motor Industry.
Why choose KANGMAI?
1. KANGMAI hose crimping machine is CE & ISO PATENT approved and SGS audited.
2. The fittings and hoses crimped by KANGMAI machine never leak oil or break. Reasons include:
(a) The machine head is processed by CNC machine, roundness and taper are within 0.1mm.
(b) The machine die base and dies use special die steel and advanced craftsmanship, hardness above 55 HRC. The die hardness is sufficient to crimp high-pressure hydraulic hoses, even 4SP or 6SP.
(c) The machine head technology is forging or casting. Casting is cheaper but has small holes in the machine head. The piston may split from the casting machine head.
3. Strict testing and inspection:
(A) For raw materials, we check again by our inspector according to international standards. Only materials that meet international standards are allowed into the factory.
(B) For hydraulic and electrical parts like valves, pumps, motors, etc., we use famous brands from both China and abroad. However, we re-check them when they enter the factory.
(C) Before the hose crimping machine enters the warehouse, the inspector checks the machine's roundness, taper, opening, speed, noise, and appearance. Only if each part meets ISO and CE standards, the machine can enter the warehouse.
(D) When the machine is packaged, the inspector checks the dies, packaging, and other client requirements. If everything is okay, the inspector signs and the machine is allowed to leave the factory.
4. KANGMAI HYDRAULIC pays attention to packaging so that the machine can reach the client safely.
5. KANGMAI HYDRAULIC PAYMENT SERVICE AND TECHNICAL SUPPORT:
(A) Tell you, my dear clients - the route of the vessel.
(B) Take photos of the machine production condition and package condition to you - my clients.
(C) Apply free container yard of your port, my dear client gives you enough time to clear your country customer.
(D) When you get our hose crimping machine, I will tell you again how to operate the machine and how to maintain it.
(E) Pay a return visit after you use our machine 2-3 hours. Offer some suggestions again about maintaining the machine so that you can use KANGMAI machine for a long time.
(F) Technical support: (1) 24-hour technical support available. (2) We can ask our engineer to your mentioned address if there is any need.
Grinding Agitator Machine,Grinding Mixer,Small Grinder Mixe,Grinder Mixer Machine
wuxi top mixer equipment co.,ltd , https://www.wxtpmixer.com