Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing

Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Pelletizing Type: Strand/Die-Face Pelletizing
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Pelletizing Type: Strand/Die-Face Pelletizing
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Product description
 
Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
 
Characteristics of product:
1.     High resistance to breakdown strength
2.     Low dielectric loss
3.     Good and stable insulation
4.     Good softness
5.     Good mechanical properties and electric properties
6.     Strong acid and alkali resistance, good chemical stability
 
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.

Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
 
Production line:
Introduction of ATS two-stage compounding line
To produce PVC cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.


About the pelletizing system
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
 
Production process
1. Measuring feeding machine 
2. First stage: twin screw extruder 
3. Second stage: single screw extruder
4. Air-cooling die-face hot cutting 
5. Cyclone separator 
6. Air cooling extended vibrating screen 
7. Metering packaging weigher


Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Main technical specification:
Machine size Screw Diameter
(mm)
Screw Speed Max.
(rpm)
Motor Power
(Kw)
Throughput Rate
(Kg/h)
ATS52/120 ATE52 51.4 600 55 150-300
ASE120 120 85 37
ATS65/150 ATE52 62.4 600 90 300-500
ASE150 150 85 45
ATS75/180 ATE75 71 600 132 500-800
ASE180 180 85 55
ATS95/200 ATE95 93 600 250 800-1500
ASE200 200 85 75
 
Characteristics of this set of equipment:
1.     Good mixing effect and the temperature control is convenient
2.     Covers a small area and doesn't need large electricity
3.     Raw material mixing and granulating are entirely automatic, human demand is small
4.     High-safety and can reduce raw materials' damage and deterioration
 
About our service:
PVC Cable Extruder Before-sale  
1.     Introduce products and applications detain
2.     Recommend suitable solution
3.     Provide with reference information
4.     Offer lab for test     
During Manufacturing          
1.     Provide with layout and engineering conditions
2.     Inform the project processing status
3.     Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information

Why choose us:
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Product description
 
Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
 
Characteristics of product:
1.     High resistance to breakdown strength
2.     Low dielectric loss
3.     Good and stable insulation
4.     Good softness
5.     Good mechanical properties and electric properties
6.     Strong acid and alkali resistance, good chemical stability
 
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.

Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
 
Production line:
Introduction of ATS two-stage compounding line
To produce PVC cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.


About the pelletizing system
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
 
Production process
1. Measuring feeding machine 
2. First stage: twin screw extruder 
3. Second stage: single screw extruder
4. Air-cooling die-face hot cutting 
5. Cyclone separator 
6. Air cooling extended vibrating screen 
7. Metering packaging weigher


Two-Stage Plastic Extruder for PVC Cable Material Compounding Pelletizing
Main technical specification:
Machine size Screw Diameter
(mm)
Screw Speed Max.
(rpm)
Motor Power
(Kw)
Throughput Rate
(Kg/h)
ATS52/120 ATE52 51.4 600 55 150-300
ASE120 120 85 37
ATS65/150 ATE52 62.4 600 90 300-500
ASE150 150 85 45
ATS75/180 ATE75 71 600 132 500-800
ASE180 180 85 55
ATS95/200 ATE95 93 600 250 800-1500
ASE200 200 85 75
 
Characteristics of this set of equipment:
1.     Good mixing effect and the temperature control is convenient
2.     Covers a small area and doesn't need large electricity
3.     Raw material mixing and granulating are entirely automatic, human demand is small
4.     High-safety and can reduce raw materials' damage and deterioration
 
About our service:
PVC Cable Extruder Before-sale  
1.     Introduce products and applications detain
2.     Recommend suitable solution
3.     Provide with reference information
4.     Offer lab for test     
During Manufacturing          
1.     Provide with layout and engineering conditions
2.     Inform the project processing status
3.     Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information

Why choose us:
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.

China Coiled Spring Pin,Stub Pin supplier & manufacturer, offer low price, high quality Mivan Pins,Carbon Steel Stub Pin, etc.

Coiled Spring Pin,Stub Pin,Mivan Pins,Carbon Steel Stub Pin

China Coiled Spring Pin,Stub Pin,Mivan Pins Supplier

Stub Pin

Coiled Spring Pin,Stub Pin,Mivan Pins,Carbon Steel Stub Pin

Hebei Qierjie New Energy Technology co., Ltd , https://www.qejfastener.com