H2s Removal Dewater Purification System for Biogas

H2s removal dewater purification system for biogas

The introduction of desulfurization tower :

Biogas Desulfurizer is designed to clean biogas by removing sulphur, dust and water from biogas, stablize biogas pressure so that stable and clean biogas can be used on biogas engine.

The main composition of desulphurizer is ferric oxide (Fe2O3)

After some time of use, Fe2O3 will lose its effectiveness ( you can find that there is bad smell when using biogas). In this case, you must replace the Fe2O3 in time.

 More photo of desulfurization tower:



Company Information and Certificates


Optional parts:



 

FAQ:

1.What's your power range of gas generators?

Re: We can offer the range from 10kW~1000kW. 

2.What's your delivery time?

Re: 7-25 work days after we get the down payment, if your order is some special engine and alternator, then the delivery time is longer.

3.What's your payment?

Re: We accept T/T, L/C.

4.What's your warranty?

Re: All our products we offer one year warranty or 1500 hours which comes first.

5.What's your MOQ?

Re: One set. 

6.What's the frequency of gas generators?

Re: 50Hz/60Hz.

7.Do you have single phase or three phase gas generators?

Re: Sure, we have single phase and three phase gas generators. 

8.What's the voltage of your diesel generator?

Re: 220/110V, 380/220V, 400/230V, 415/240V, 440/260V, 460/270V, and double voltage.

Contact us:

  H2s removal dewater purification system for biogas

The introduction of desulfurization tower :

Biogas Desulfurizer is designed to clean biogas by removing sulphur, dust and water from biogas, stablize biogas pressure so that stable and clean biogas can be used on biogas engine.

The main composition of desulphurizer is ferric oxide (Fe2O3)

After some time of use, Fe2O3 will lose its effectiveness ( you can find that there is bad smell when using biogas). In this case, you must replace the Fe2O3 in time.

 More photo of desulfurization tower:



Company Information and Certificates


Optional parts:



 

FAQ:

1.What's your power range of gas generators?

Re: We can offer the range from 10kW~1000kW. 

2.What's your delivery time?

Re: 7-25 work days after we get the down payment, if your order is some special engine and alternator, then the delivery time is longer.

3.What's your payment?

Re: We accept T/T, L/C.

4.What's your warranty?

Re: All our products we offer one year warranty or 1500 hours which comes first.

5.What's your MOQ?

Re: One set. 

6.What's the frequency of gas generators?

Re: 50Hz/60Hz.

7.Do you have single phase or three phase gas generators?

Re: Sure, we have single phase and three phase gas generators. 

8.What's the voltage of your diesel generator?

Re: 220/110V, 380/220V, 400/230V, 415/240V, 440/260V, 460/270V, and double voltage.

Contact us:

 

Wall Angle Roll Forming Machine is used to make L type design,which can be used for corner bead,suspended ceiling system.

Depend on customer many different design,such as with punching holes,or embossed dimples to make it strong.or mesh type.Different designs can be cusotmized as your request.

Main component of line:Manual Decoiler,feeder,main forming machine,automatic cutting

Wall Angle Roll Forming Machine

Wall Angle Roll Forming Machine,Metal Ceiling Tee Grid,Wall Support Roll Forming,Galvanized Slotted Angle Bracket

Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com